The Chemguard ULTRA-WIDE On-Demand Proportioner is designed to provide the correct amount of foam concentrate to mix with a water stream over a wide range of flows. This device is completely mechanical, requiring no electrical connections, and requires no scheduled maintenance once installed and tested for proper operation.
Chemguard’s ULTRA-WIDE proportioner is assembled in a bronze casting having a 6-inch ASA Class 150 flanged water inlet and solution outlet, and a 2-inch ASA Class 150 flanged concentrate inlet. The proportioner has an internal water float operating against a spring inside a tapered throat. The water float is attached to a hollow shaft with a slotted orifice that is connected to the concentrate inlet. As water flow increases, the water float is depressed, exposing a portion of the slotted orifice, thereby allowing concentrate to be injected into the water stream in correct proportion to the water flow. Water pressure at the point of injection is slightly lower than concentrate pressure due to the flow of water around the water float. The water float movement is proportional to the flow of water through the device, resulting in accurate proportioning of foam concentrate with water over a wide range of flows.
The Chemguard ULTRA-WIDE Proportioner is designed for operation in systems of the Balanced-Pressure type, where both the water and concentrate pressures at the proportioner are equal. These systems are generally described as one of the following: